Offline Showroom in USA
Post Offer Free
MOSINTER GROUP LIMITED
MOSINTER GROUP LIMITED  

Gold Index: 82941

You are here: home  > Frac Ball and Dissolving Frac Ball  > Frac Ball PBI and PEEK

Frac Ball PBI and PEEK 

Payment Terms: T/T,L/C,WU 
Place of Origin: Zhejiang, China (Mainland) 
In USA Showroom : Offline Showroom in USA
inquire skype
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: MOSINTER
Production Capacity: 10000PCS/year
Delivery Date: within 7 days
Main material: PBI(Polybenzimidazole)
Compression strength: 70-80MPa
Tolerances of diamete: ±0.05mm
Density: 1.54-1.56
Means of Transport: Ocean,Land,Air
Packing: As per request of clients
Name: Frac Ball
Temp: Working in the water under ...
Hardness: HRC=112(HRC=HRM)
Size: Inch 1.25' to 3.5'
Package: Box or Drum

THIS IS TO CERTIFY THAT WE, THE UNDERSIGNED, HAVE INSPECTED THE QUALITY OF THE ABOVE MENTIONED GOODS AND FOUND THE RESULT OF INSPECTION AS FOLLOWS:

Frac Ball

Main material: PBI(Polybenzimidazole)

Working in the water under 150-180℃

Compression strength: 70-80MPa.

Low density(1.54-1.56).

Resistance to   Acid, alkali, salt and other chemical substances.

High level of   wear resistance, hardness, strength, impact strength.

No deformation in the situation of high temperatures   and pressure.

Smooth and good stability.

Cracks, scratchs, chips could not be allowed on the   ball's surface.

Hardness:HRC=112(HRC=HRM)

Tolerances of   diameter:±0.05mm


One of the tools used by some operators of hydraulic fracturing equipment includes specially sized "frac-balls" which are injected into a well to block or close off portions of a well to allow pressure to build up and cause fracturing in a target section of the well. Frac-balls may be made of various materials, including G-10 (or other related phenolics), Torlon, PEEK, and other high-temperature thermosets or thermoplastics. Typically, the material selected is based upon the operators' experience and the chemistry and temperatures within the well. Frac-ball sizes are selected specifically to fit within the well-bore or sliding sleeves which vary in diameter as the well sections progress from upper to lower (or end) sections. 

One popular method for creating multiple fractures in a wellbore is the use of frac ports & sliding sleeves. Openhole packers isolate different sections of the horizontal well. A sliding sleeve is placed between each packer pair and is opened by injecting a properly sized fracball inside the borehole. Typically, a completion string is placed inside the well. The string include frac ports and open hole packers spaced to specifications. The spacing between packers may be up to several hundred feet. The packers are actuated by mechanical, hydraulic or chemical mechanisms. In order to activate each sleeve, a properly sized frac-ball is pumped along with a fracturing fluid inside the well. Each ball is smaller than the opening of all of the previous sleeves, but larger than the sleeve it is intended to open. Seating of the fracball exerts pressure at the end of the sliding sleeve assembly, causing it to slide and open the frac ports. Once the port is opened, the fluid is diverted into the openhole space outside of the completion assembly, causing the formation to fracture. 

At the completion of each fracturing stage, the next larger frac-ball is injected into the well, which opens the next sleeve, and so on, until all of the sleeves are opened and multiple fractures are created in the well. The main advantage of this completion technique is the speed of operation (by activating multiple fractures with a single completion string, also reducing cost.


PEEK Balls

PEEK and composites of PEEK are melt processable materials with outstanding performance including high temperature resistance(Can withstand temperatures up to 260 ℃ for a long term), good corrosion resistance, hydrolysis resistance, self lubrication, abrasion resistance, high strength, high precision, dimensional stability,which are widely used in petroleum machinery industry. The PEEK and composites of PEEK developed by our company have been widely used in the production, transportation and other aspects of underground survey, oil drilling tools and petrochemical equipment. We have developed about 100 PEEK accessories such as balls, gasket ring, before and after plug, insulated ring, retainer, Yan Xintao and wear sleeve.



bigPhoto
skype Mr. Fedor

Tel: +86-574-89212210
Fax: +86-574-89212215
Mobile: 86- 189 8930 5995
Contact to this supplier

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center  for help!

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

MOSINTER GROUP LIMITED [China (Mainland)]

Offline Showroom in USA

Business Type:Manufacturer, Trading Company
City: Ningbo
Province/State: Zhejiang
Country/Region: China (Mainland)

Follow Us: Follow us on facebook Follow us on linkedin

Fedor:   skype

You May Like: